Vehicle Battery Analyser Durst BT-M5680 with a built-in thermal printer.
The Durst BT-M5680 Battery Analyser uses an advanced conductance testing technology to easily, quickly and accurately measure the actual cold cranking amps capability of the vehicle starting battery, health state of the battery itself, and common fault of the vehicle starting system and charging system, which can help you to find the problem quickly and accurately.
Battery test
- Battery test with the battery installed or removed
- Battery Test Results: Good or replace
- State of charge: digital display (volts)
- Cell resistance is displayed in MO
- Battery life expectancy is shown in % on the display
- Before the test: enter the current battery standard (CCA, SAE, din , E , IEC or JIS#) for better accuracy
Starter test
- Quick and easy starter test to check starter current
- Results are shown on the display
- The test result obtained can be used to determine whether the battery is too old or whether there is a problem with the starter
Technical specifications
- Suitable for: all 6 V and 12 V car batteries
- Voltage range: 5V ~ 18V DC (max.)
- Analysis time: < 5 seconds
- Test capacity (A):
- CCA: 100~1700A
- IEC: 100~1700A
- JIS: 100~1700A
- EN: 100~1000A
- din : 100~1000A
- Multilingual German, English, Italian, Spanish
- Dimension ~ 245 x 105 x 50 mm
- Weight ~ 800g
Contents
- Battery tester with integrated printer
- Battery connection clamps (removable)
- Transport bag
- Operating instructions / technical documentation
Alternator test / generator test
- Charge state test at 2000 rpm
- Test without electrical charging at 3000 rpm
- Test results are displayed after the test
Charging System and Rectifier Diode Test
- Ripple test
- Loaded volt test
