The new Durst Hypastart series of jump starters are simply the safest, lightest and most powerful industrial jump starters for all petrol and diesel engines up to 50L in displacement and exceeding class 9+ vehicle classifications. Please reference the chart to select the right size Hypastart model for your requirements.
The Durst Hypastart series of jump starters are designed and manufactured in Australia from the ground up using the latest technologies available. The Hypastart is a battery-less jump starter incorporating high capacity super capacitors creating a product that is not only lightweight and ultra-powerful but super safe to use and unlike traditional lead acid or lithium battery jump starters there is no chance of gassing, fire or explosion.
The Durst Hypastart has features typically not seen in other jump starters notably the “HYPACHARGE” function allowing the user to start a vehicle with a flat battery even if your Hypastart is low or even dead flat.
The Hypastart can charge itself from a vehicle with a flat battery by simply attaching the start leads to the battery and moving the switch to the “ENERGIZE” position, waiting a few minutes for the green “READY” to illuminate indicating it’s ready to start. Move the switch position to “START” and start the engine, after a few seconds of running move the switch back to the “ENERGIZE” position to top up the jump starter and back to “OFF” position when the green “READY” light illuminates and you are fully charged and ready to start multiple times without pre energizing.
RECOMMENDED USE ALL 12V VEHICLES
VOLTAGE 12V
STARTING CURRENT 1150A
DISCHARGE DURATION 100A@12V = 50 SEC
STORED ENERGY 36Wh (super capacitors)
ENERGIZE TIME 50-100% = 12.5 MINS 0-100% = 25 MINS
OPERATING TEMP -40°C to 70°C / -40°F to 158°F
ENCLOSURE POWDERCOAT ALUMINIUM
SIZE L x W x H 321 x 191 x 406
INGRESS PROTECTION Optional
WEIGHT 13.25KG
CAT RECEPTACLE NO
ANDERSON YES, 350A
RECOMMENDED START LEAD (NOT INCLUDED): 50MM2 DUAL INSULATION MULTISTRAND COPPER SUPERFLEX 1.5-5M
START LEAD OPTIONS ANDERSON TO CLAMP
BUILT IN VOLT METER YES, HIGH VISIBILITY LED
12V 2.5A MEMORY MINDER
OUTPUT
YES, 2M OBD2 LEAD INCLUDED
BUILT IN LITHIUM BATTERY
POWER SUPPLY
NO
EXTERNAL AC CHARGER INCLUDED, 15V 4A AC-DC
ACCESSORIES • CORDURA LEAD BAG Small or Large
• WATERPROOF DUFFEL BAG
• PROTECTIVE NEOPRENE SLEEVE
FEATURES:
HYPACHARGE Ready to use in a matter of minutes
ANTI-SPARK No sparks when connecting and disconnecting leads
RPP Reverse polarity protection
ANTI SPIKE Complete anti spike protection
12V/24V Two selectable voltages in a single unit
IPF Self resettable Ignition protected fuse
LCD MONITOR Instantly monitor Hypastart capacity and charge levels
GFE PROTECTION Safely operate with no gassing, fire or explosion even if damaged
ULTIMATE LIFESPAN More than 1,000,000+ cycles
METAL ENCLOSURE Built Durst Tough in Australia
LIGHTWEIGHT Twice the Power and Half the weight of traditional jump starts
DESIGN Fully engineered and made in Australia
SPECIFICATION |
HYPASTART X2500 |
HYPASTART X2500MS |
HYPASTART X4500MS |
|---|---|---|---|
| VOLTAGE | 12/24 | 12/24 | 12/24 |
| STARTING POWER | 40KW | 60KW | 120KW |
| OUTPUT 12/24 CCA | 2000/1000 | 4000/2000 | 8000/4000 |
| RECOMMENDED VEHICLES | Truck, Bus, Industrial Machinery | Large Machinery, Truck | Extra Large Machinery, Dump Truck, Mining |
| RECOMMENDED VEHICLE CLASS | CLASS 5-6 | CLASS 7-8 | CLASS 8-9+ |
| 12-15V (0-100%) CHARGE TIME | 25 MIN | 25 MIN | 50 MIN |
| 0-12V CHARGE TIME | 60 MIN | 60 MIN | 120 MIN |
| OPERATING TEMP | -40°C to 70°C / -40°F to 158°F | -40°C to 70°C / -40°F to 158°F | -40°C to 70°C / -40°F to 158°F |
| ENCLOSURE | Aluminium | Aluminium | Aluminium |
| DIMENSIONS LxWxH mm | 300x200x400 | 300x200x400 | 480x200x400 |
| WEIGHT | 11kg | 13kg | 19kg |
| CONNECTOR | ANDERSON PLUG | CAT | CAT |
